View Single Post
Old Aug 16, 2002 | 10:20 AM
  #6  
Nelson's Avatar
Nelson
Administrator
 
Joined: Jul 2002
Posts: 56,734
Likes: 3
From: NY
Default Re: High idle after engine swap

Originally posted by LeftCorner
I just had a B18C1 put in my '93 Integra with a '95 GSR throttle body & Skunk2 manifold and there was no spot for the FITV so it was left out. But when I start the car the idle jumps to 2500 and will slowly go down to 2000 and then surge back up and it'll do this for about 5 minutes until it settles at 1500. When driving if I let off the gas the idle goes down to about 1000 and then jumps up to 2000 and will settle at 1500. IAC is connected, The idle screw is turned all the way in, PCV connected, bled the coolant several times and all vacuum lines are free and connected correctly. What's left??
Yea, I have that same problem on my B16... check all the lines, so far it went down after we played with the coolant lines, I also had the problem of it reving up and down upon initial start.
__________________
9Y0 Cayenne GTS
E46 ///M3
YD4 MDX
- SOLD
EG Ferio - SOLD

FA Ferio - Returned
www.NelsonLee.net



Reply