Originally Posted by rcurley55

sigh - I read them all just fine - what you are attempting to do is shove a square peg in a round hole. try as you might, but it won't work. making any kind of bass notes at any volume is probably going to require more power then your factory system will provide!



And ask yourself - why do they distort? Then look above at why I made the suggestions I did - the reason I said what I did will become clear.



Don't generalize people on this board - I'm actually suggeting the proper solution for the sound you want...



This is true, but they will distort if they have no power



read the statement above....



A sub run free-air is going to require MORE power then a small sealed one would. Again, you will probably want more power - not a ton, but more then the factory will provide - a simple, small 100W amplifier will do the trick



It all depends on how you install and what you install. Do what you will, I'm just trying to save you from wasting money - in the end, it's your decision.

So in the end, decide if you want to do things right the first time or not. I don't understand why you are so against adding an amplifier to make these 6x9 subs you want to buy work properly?