Your better off getting a 94-95 Gsr. Easier. Umm you will need the tranny, upper driverside mount, and rear mount off a 94+ tegra. And the 2 torque ,mount from you stock civic. they are the ones on the lower front of the motor and tranny you have one on each side. you will need the linkage off the tegra. Ecu from the tegra. ummm you can use your stock harness it will all plug in as long as you get a OBD1 GRS. And you will need tegra axels. Thats it. Install the tranny,harness to the motor then the half shaft then the motor is ready to be dropped in. Once in you will have to install the axels and plug all the vacs,hose,and other things and your done. Drive it to your local muffler shop and have the flange turned on your piping.