thanks for the info neex.. i'll be checking over things again tonight. I was also givin a tip to check the crank sensor because it could possibly be bad & that would limit me from having spark.
My engine will turn over all day, it just won't spark. I've even replaced the ICM that tested good as well as my MSD distributor. I've put a stock distributor back on the engine so that it was using a stock coil (which tested good) also put a new cap & rotor on it. I just replaced the grounds that go from the chasie to the block with really nice ones.. just to see if that would help me out at all. I still get no spark.. this is extremly frustrating, i definatly appreciate all the help from everyone & i will keep you posted. thanks
Tony