OK I just found my post about bleeding the ABS. /cut/paste/ here it is! This is for '94 to '97. Beginning in '98 there's a whole different system.

Get a clear hose that fits that ABS bleed screw, make it kinda snug. Put the end in a cup or jar or something. Take off the rubber cap & the funny plug underneath so you can fill the reservoir.

Start the engine, let it run till the ABS pump quits then turn it off. Carefully crack open the bleed screw. Too much too fast & it'll blow off the hose. There's enough pressure to inject brake fluid through your skin. Refill the reservoir.

Repeat the whole mess again & again until there's no air bubbles coming thru that hose. If air bubbles was your only problem, then you'll be all fixed after doing this maybe 3 or 4 times.