I have a 2000 Accord Coupe V6 with tockico illumina 5way and ground control coilovers with front and rear camber kit. My car is lowered enough to give it the tuck look, but I have a problem. When I hit a bump my front control arm and camber kit hits the bottom of the inner fender on both sides. Before I put the camber kit on my car was the same height and never bang unless you hit a huge dip. MY QUESTION Is.....If I raise the car back up afew inches to give clearance room, will i need to get a new all wheel alignment and front and rear camber kit adjustment.

My Accord rides almost close to stock comfort with no bouncy or stiffness as it cab get , it just bangs .......

Open for suggestions
RED in Seattle