i painted mine a while back and they still look good, i went to craft store and bought a can of candy apple red transparent enamel paint and a clearcoat. take the lightas off, wash them, sand them with really fine grit sand paper, spray 2 or 3 layers of red (spray each one thinly so it doesn't run down the light and let each layer dry) then spray a layer of clearcoat and let it dry. by the way i took masking tape and masked the reverse light part cause i didnt want that bein red, and yes you do need to sprasy even the red part so its the same shade of red as the blinker when you're done