The Tokico Blues have rather soft damping rates, I'd honestly go no lower than 1.75 inches. Cut the bumpstops to the height Tokico recommends.
For added insurance against tire damage, you can flatten out that welded flange over the tire.
Carefully cut the flange - perpendicular the flange edge - in sections about an inch long. Using a small length of 1x2", hammer the flange sections back so they lay flat against the unibody.
And if you can manage it, you ought to re-install your wheel well liners. They're there for good reason.
:cheers:
__________________
:: :ToDspin: - supermod
- but who gives a shit?
:: HAN Integra FAQ: If, by some miracle, yours hasn't been stolen... check it out!
Last edited by NorCal DC4; Jul 21, 2004 at 10:41 AM.