My itr is completely swaped in... I have all wires hooked up (I used the type r harness )except I have one extra black wire with a yellow stripe..... It would have gone to the driver side shock tower plug on the ItR....except my CX's plug doesn't have room for one more wire... The black with yellow wire that IS hooked up goes to the speed sensor...

Anyway It turns over but will not start...
I get no check engine lights
I don't have an immobilizer
I get spark....
I get fuel to the fuel rail but the injectors don't spray...
(they are grounded but the other wires that go to the ecu from the injectors do not send a pulse signal when Im turning it over...)

any ideas to why the injectors don't spray
or what that second black wire with a yellow stripe goes to?