Originally Posted by darkstar3215
ok thanks i will have to try that tomorrow. bu the way it is a 1990 acura integra
Oooh, then it's different, those instructions were for a 3rd gen.
Okay, for the 2nd gen.
1) Remove the two screws from the inside of the fender well on the bumper.
2) Remove the two screws from each bumper light, unplug the lights.
3) Remove the two bolts from under the bumper.
4) Remove the bolts behind the bumper lights, total of 4.
5) Grab the center of the bumper, lift up and pull forward, it should come off.