I know this works on an RSX (had the same problem myself when I pulled my passenger seat, and turned the car on.

1st..turn off the ignition and remove the MES connector(green or yellow plug with 2 wires in the underdash fuse box)and connect your paperclip between the two wires(insert one side deep and the otherside loosely)

2nd..Turn ignition on, SRS light will come on for about 6 seconds then shut off

3rd..disconnect the paperclip within 4 seconds of the light shutting off. SRS light will come back on.

4th..reconnect the paperclip within 4 seconds of the light coming on, SRS light will go off.

5th..disconnect your paperclip within 4 seconds, SRS light will indicate memory has been reset by blinking 2 times.

6th..Turn vehicle off and wait 10 seconds. Start vehicle, SRS light should come on and then go off as normal.


If it doesn't work the first time, keep trying. Timing is the key here.