Seems like SumAccordGuy is saying to put each amp channel on a seperate voice coil. That sounds like it would put 2 Ohm to each channel. The only question then is the amp truley stable at 2 Ohm on each channel. If it is stable at 2 Ohm (which I don't know the answer to) then the idea is sound. If it is NOT stable at 2 Ohm on each channel, then couldn't pnthr30 wire each coil in series (to give a 4 Ohm load) and use his amp bridged? This was your origional suggestion, I understand, but given the units we are talking about, is this really all that bad of an idea. Seems like the 'safest' bet in terms of frying anything.