Originally Posted by Andy
Are you using some sort of conversion harness to connect to the ECU? I wasn't aware there even was a pre-OBD to OBD I conversion harness. I've seen the other way around to plug a P28 into a EF car for a SOHC VTEC but not the other way around.
I'm in the process of making my own harness
under the hood i spliced the TEG ENGINE HARNESS onto the CIVIC CAR HARNESS
Inside the TEG at the ECU i cut the connectors off with 4inch's of wire so that i can wire those plugs to the CIVIC CAR HARNESS, so that the plugs will go right into the TEG ECU which is now located in my CIVIC.
it's somewhat hard to understand because of the wiring mess that this swap involves.. i haven't found anyone else out there that has done it so that i can ask for advise so me & my ASC buddy have been brain storming the entire time!
if i can finish my wiring i'm going to attempt to fire it up tomarrow.. i hope everything goes as planned!