Originally Posted by civicrookie
ok, so when i order my engine, i should get engine, trans, ecu, and motor mounts and the rest i should already have or will work... right? Thats what i understand from the previous message, but i want to be sure that i have all the right parts before i start this... and for the record, my mech and i are doing the swap together... his garage and knowledge, and my willingness to learn, so i think it'll be a good first swap... but all that aside... i just want to make sure i have it all...
well...if you are ordering the first gen motor, the ecu will not work, but you can sell it on ebay or whatever and then order the p-30 ecu...also the trans WILL NOT work without the hasport conversion kit...other than that a set of integra mounts will sit the engine in there nicely, also you will need 99si or gsr shift linkage to make the swap work. I would also recomend GSR inter. shaft with GSR axles. I have done this swap so if you ever need any specific questions answered or you run into any problems just shoot me a pm mang...goodluck with your swap, and hopefully you can learn a lot like I did by doing my own swap....:goodjob: