sS im assuming then that you didnt have the clip to connect it into the fuse box. Ricght so heres what you want to do. On the drivers side you need to get power to the white/yellow wire. Thats the main power source to the drivers side window switch. That should let you use your drivers window correctly as long as they only cut the main cabin plug off the harness. On the passenger side the blue/black wire is main power for the passenger switch. I would advise wiring in a 20 amp fuse between whatever power source youre using and the window wiring though to keep it safe. And if you want to wire up the drivers switch to controll the passenger window you need to run wires and connect the blue/yellow and blue/green wires from drivers wiring harness to the passenger wiring harness.