Originally Posted by Keytwo
I was thinking of getting a type-r spoiler on my LS. Does any one know if this would require new mounting holes, or if it would fit into the old holes?
Originally Posted by Sirreal45
Does the type R spoiler differ from the GSR spoiler as far as placement of the holes go?
Your questions have been answered in this thread already.... see below.
*Note: The quote below has been edited for brevity. **
Originally Posted by Jngrbrdman
.... I put the GSR spoiler from a coupe on my car. It looks fine, but
technically it does not fit. ... it's more than just drilling 4 holes in the deck. The places that are marked for drilling are not the same distance as they are on a coupe. The sedan spoilers are at least an inch or two longer than the coupes.
***
Check out this album.***
You can see in the pictures of the underside of the deck that the holes for the spoiler are further out than the holes I had to drill. It doesn't look wrong at all on the outside. Its really only when you look under the deck that you can tell that it doesn't fit.
Now, if you already have holes drilled from a 4 door spoiler then you are hosed.
A 2 door spoiler won't work if you already have holes drilled. If you have a roto zip drill then its not hard at all to cut out the holes for a spoiler in a sedan.
I haven't ever had anyone say that my spoiler doesn't look right and that includes car show judges.
They do make 4 door Type R spoilers. I would look into getting one of those because it might look funny being so far from the edge of the trunk. A GSR spoiler doesn't look funny because it hangs over a bit. A spoiler that doesn't hang over would look weird.