unless they changed it from the 01 ex 4d to your 02 in the center consol way down in the bottom that slightly diffrent colored pannel will lift out in the front of it there is a slot to put a screwdriver in i was able to pull the pannel out with my nail under there towards the front to the driver side there is a bolt and 2 cables if you pull up on the e-brake the bolt and cables will go forward to tighten it just tighten the bolt and then re apply the cover --- and put all your stuff back in your consol also if you keep it tight till you need to change brake pads you will most likely need to loosen it when you put new pads in ill go get some pictures right now