Instalation....

- Install the timing belt in the reverse order of removal
- Position the crankshaft and the camshaft pulleys as shown before installing the timing belt.
---Set the crankshaft so that the No.1 piston is at top dead center (TDC). Align the groove on the teeth side of the timing belt drive pulley to the pointer on the oil pump.
---Align the TDC marks on the camshaft pulley with the cylinder head upper surface.
-Install the timing belt tightly in the sequence shown. (1) Timing belt drive pulley (crankshaft) -> (2) Adjusting pulley -> (3) Water pump pulley -> (4) Camshaft pulley.
-Loosen the adjusting bolt, and retighten it after tensioning the belt.
-Rotate the crankshaft about 4 or 6 turns counterclockwise so that the belt positions on the pulleys.
-Adjust the timing belt tension.
-Check the crankshaft pulley and the camshaft pulley at TDC.
If the camshaft pulley is not positioned at TDC remove the timing belt and adjust the positioning and repeat the installation procedure and reinstall the timing belt. After installation, adjust the tension of each belt.