Old 03-30-2004, 06:47 PM
  #6  
IntegraR
Registered User
 
IntegraR's Avatar
 
Join Date: Nov 2003
Location: Bellevue, WA
Posts: 141
Likes: 0
Received 0 Likes on 0 Posts
Default

-Remove the splash shield.
-Remove the power steering pump. - Do not disconnect the P/S hoses.
-On vehicles with A/C remove the A/C compressor adjusting pulley with bracket and the belt.
-Remove the P/S bracket.
-Loosen the alternator adjusting bolt and pivot nut, then remove the belt.
-Remove the cruise control actuator.
-Remove the engine support nuts. Loosen the mount bolt and pivot the side engine mount out of the way.
-Remove the cylinder head cover.
-Remove the timing belt upper cover.
-Remove the special bolt and crankshaft pulley.
-Remove the timing belt upper cover and the lower cover.
-Loosen the timing belt adjusting bolt 180° .
-Push the tensioner to release tension from the belt, then retighten the adjusting bolt.
-Remove the timing belt from the pulleys.
Attached Images
File Type: gif
95 civic 16 valve.gif (62.8 KB, 372 views)
File Type: gif
95 civic.gif (16.7 KB, 309 views)
File Type: gif
95 civic 4 dr.gif (15.0 KB, 260 views)
File Type: gif
civic timing.gif (13.7 KB, 277 views)
File Type: gif
civic timing 2.gif (9.6 KB, 281 views)