I built my own cold air setup. The filter (big ass K&N) sits inside the right front fender in the space where the old silencer used to be. I ran 3" mandrel bent aluminum from the compressor inlet all the way to the filter. I used 3- Ls, actually I bought 1 L and one U, I cut the U in half to make 2 Ls. They are all connected with silicone couplers. I will see if I still have photos. (All my JPEGs got wiped out this past weekend) This is not a cheap way to go but it works well. Be prepared to pay for mandrel bent aluminum (expensive)