Shortly after i posted my forum i started working trying to find out the problom.. Shortly after i pulled the plug and noticed that i was not getting any spark i pulled my cap off the distributer and noticed some plastic pieces broken in there .. Turns out the set screw in that holds the rotor on the small shaft had backed it self out and damaged the rotor and knocked a wire loose in the distributer.. A quick trip down to the parts store and it was running fine again.. But a few hours later i was running it pretty hard again and broke a big piece of my clutch on the disc where the springs are held in.. So ive replaced it with a act stage 3 and hd pressure plate... THANKS FOR THE HELP!!!! Chris