OK let me try and help. Drill out all the weilds. You are going to need a prelude (92ish) hood latch release wire. The reason is the JDM cars come with the wire from the right hand side so on you JDM rad support it will mount up on the right side and the USDM wire won't reach. Other then that you don't need anything. It is very simple to do if you have someone or yourself that knows how to weild. When drilling out your weilds on the USDM rad support don't worry about trying to say the spot just dril right through it. Theres about 18 to 20 weilds to be drilled out. When your weilding the JDM one on don't worry about putting that many weilds on it. If you get good weilds you'll only need between 10-15 weilds. Also make sure you use a lever to get that bad boy on there even. As fare as wiring the lights its easy. You should be able to look at it and figure it out. Like someone said theres a diagarm on HT.com that shows you how to do everything. I'm still (I've had my front end for about 1 1/2 years) haven't been able to wire my fog lights. I'm trying to get them wired up with the OEM JDM fog switch and hooking it up the OEM way but I'm have trouble finding info on this. Anyway let me know if you have anyother questions and I'll try and help or let you know where to find more info if I don't know.