Alrighty.....so apparently lowering youre ride causes a Sh1tload of drama and uneccessary worrying. Friggen negative camber wear, struts bottoming out, and when you try to fix the camber.... nutin but the D R A M A. So yes besides the point i have Neuspeed sports, KYB GR2s, and both ingalls and spc ball joint camber kits but niether are installed. The ingalls was a complete NO NO because the upper control arm was clipping the fender edge then rubbed on the inner fender. I was so freaked out and annoyed by the noise that i took it out and ordered the spc ball joint. From what i read on this forum, there werent supposed to be any complications.....OH BOY WAS I WRONG. When i got em installed, even more banging was going on. it turns out that the bolt on top of the camber kit was too high and it was hitting the top of the fender.... and pretty harshly too. From under the hood, i could see the metal being pushed up!!! so yeah, currently i have no camber kit but extremely bad tired wear so yep, im trying to kind a good setup without unlowering my baby. anyone out there have neuspeed sports and spc ball joint combo that works??? PLEASE REPLY!!!!!!!!!