Take out both half shafts then,

TRANNY

1. take off everything on tranny
2. unbolt backside tranny mount off the tranny
3. get all tranny bolts out of mounts
4. pull off tranny

CLUTCH

1. take off pressure plate with 10 mm 12 point socket
2. take off flywheel with 17mm 12pt socket
3. resurface flywheel most likely, otherwise skip #2 and #3
4. Instal new throw-out bearing
5. instal flywheel
6 put the clutch disc and pressure plate on the fly and lightly tighten bolts, put the clutch alignment tool in and then tighten down pressure plate bolts
7. install tranny and everything you took out
8. install half-shafts