View Single Post
Old Feb 27, 2004 | 09:59 PM
  #4  
S2Kev's Avatar
S2Kev
Senior Member
 
Joined: May 2002
Posts: 4,019
Likes: 0
From: Bay Area, CA
Default

Originally Posted by westcoaststyle
There are a couple things you can do to remove the pressure:
1) remove fuel cap
2) unplug the fuel pump connector and run the car till it dies

After you do that, you should be ok and it won't squirt.

hih
Dang all that work just because you're scared of some fuel leaking out from that banjo bolt? :chuckles:

I haven't had any instances where the fuel would squirt out. I just put a rag around the banjo bolt area and then crack that bolt loose and let the fuel leak all onto the rag. I'd recommend disconnecting your battery before doing that though, you don't want to cause any fires h:
Reply