View Single Post
Old Jul 31, 2002 | 11:39 AM
  #4  
Etylorcen's Avatar
Etylorcen
Turbo Mafia Soldier
 
Joined: May 2002
Posts: 316
Likes: 0
From: San Diego
Default

I hope you were kidding on recommending the vtec killer cams because these are a race only cam meaning they will not idle and they have absolutely no low end power at all. To actually break 12's all motor is going to be pretty hard, I'd say impossible with a 11:1 CR. You're going to need to bump it to 12 to get the most. With toda spec b's you might be able to do it with some good driving but not these are not a drop in cam. You need to do a lot of other work. You'll need to properly size your header and exhaust. Get a larger tb to help your engine breath. Headwork is also important. Also, lots and lots of tuning. I know someone making 220hp at the wheels all motor and has yet to break into the 12's. He's come close however.
Reply