Originally Posted by scoobajdm
also, i had to swap out the JDM harness because it was trashed and i had to use a USDM harness from a GS-R. after the harness swap the code started flashing, but not before. so i don't know what's going on.
bad idea
i would only use an h23a1 or h22a/1 harness
if the accord wiring harness is different (and the accords F is very similiar to the H series), then obviously the GSR harness will probably be off since its for a B series
see if you can get a USDM h23a1 harness and just run 3 wires for the vtec thru the firewall
~boomer