Bare with me, I'm quite sleepy...but here's how it goes (roughly):

Take some speaker wire (I used 14 gauge), some crimps, and possibly a drill. Don't forget your flip switch!

Remove your back seat.

That big round metal thing is your fuel pump. There should be 2 wires coming out of it; yellow and black/white. I forgot which one we spliced into, but it's either one of the two...crap, or was it both? I'm not sure if the black/white and the yellow were both tapped into.

Anyhoo, take your wires and crimp them onto the wires from the fuel pump. Run the wires up to your flip switch, and connect one to the 'on' prong and one to the 'off' prong.

That's about it. Find a place to mount your switch, and be sure you have the right amount of wiring to be able to get to that spot.

Put your seats back and you're done.

Gnite....zzzzz