Well I searched around the forums and found nothing on this so let me post it here! Well I was driving my h accord a few nights back and it was running great goin into vtec and pulling hard! I met my g/f after work and headed home.. we get next to each other and decide to race.. i drop it into third and at hit it.. when all of a sudden i lose a bunch of power. I slow down knowing something was wrong. and i floor it and i go into where vtec ushually pulls and i do not hear the familiar loud sound or pull! I go home park it and try again.. I took a look at my wiring to make sure nothing came loose! and visualy inspected the engine bay! i take it out again today let it warm up and try goin into vtec. It sounds like it goes into vtec but it is a very small sound when it kicks in.. and there is no power.

Well the next day I decide to take out the vtec controller and resolder and shrink my wires and put the ecu back to normal! I reset the ecu and start up the car! Ta daa... code 22 apears! Vtec pressure! I tested it when i had my vtec controler hooked up with a voltage meter and it seems to be sending a signal! ive even tryed changing the switch itself! What to do??