Originally posted by epx
I had my glass guy tell me that you can easily be seriusly injured tring to install power windows yourself. He said the spring loaded arm that lowers/raises the windows can take your finger right off if you arent carefull.
HAHAHA!!! that's funnie.. only reason he did that was to discourage you from trying and pay him the BIG BUCKS to do it since he's a "P-R-O-F-E-S-S-I-O-N-A-L."
the install isn't too bad. if you want the power locks and windows, here's what you need:
1.) harness from driver side door, through the rubber grommet, under the driver's seat and passenger's seat, up back towards the dash, then through the passenger door grommet and into the door.
2.) if you don't want to install aftermarket door actuators, then get the factory ones attached to the door hinge.
3.) complete rails with motors on them.
4.) ex coupe panels complete with switches and door handle trims.
5.) optional = since you have the complete harness for this, the wires for power mirrors are already there.
6.) LOTS OF PATIENCE!!!! have fun... :thumbup: