Thanks LudeBehavior.
My car is a '98 w/ only 31K miles.
My rears first started clunking, then
I changed the collar per someone's
advice and TSB on the vtec.net forum.
Now, my fronts clunk, but upon removing
the collars, I found that the original fronts
were shorter than the new collars
that were used for the rears.
I replaced them anyways, and the clunks
are still there.
Even at 70 degrees in CA, the clunks are
present.
Also, recently, I cannot start the car immediately after getting in. It won't even turn over. So, I would take the key out, or open & close the door, and try again. Eventually, it would start. I think
it was the recalled ignition switch, which was already changed in '99.
This SH is starting to frustrate me.