Originally posted by newgsrdriver
FITV is cake...3 10mm bolts facing the ground. It is under the TB.
Make sure the bolt on the end is completely tight. I wrapped mine up in duct tape and bolted it back in. Ideally, you would like to completely eliminate it from the process.
Do you mean you blocked the three large openings with duct tape?
I'm thinking this device is more my problem than IAC. I get fast idle when its cold, but takes a long time to come down. I have also noticed that temp gauge never reaches middle posistion. Morel ike only 1/3rd from cold end. Car is new to us, radiator was replaced before we got it and supposedly the thermostat. Actually, now I'm thinking thermostat may be in wrong, or even missing.
Where should temp gauge needle normally sit at normal oparting temp?