Originally posted by SadisticRacing
I plan on doing a full build of this motor top and bottom ends just was trying to get suggestions on what could get me there by next year.
Well, depends on if you wanna go all out or not.
First, I need to know exactly what your mods are. Some will need to be replaced I'm sure.
Not stage 1: Skunk2 stage 1 cams, Skunk2 valvetrain. Hondata.
Not stage 2: Stage 1 + CTR pistons, Eagle or Crower Econobillet rods. Hondata.
All out stage 1: B18C1 block or GE sleeve to 1.8 liters, CTR pistons (if GE sleeve then 12:1 CR forged pistons), Crower Econobillet rods, Skunk2 stage 2 cams, Skunk2 valvetrain. Entire exhaust system should be at the least 60mm, preferably 2.5." Hondata.
All out stage 2: B18C1 shortblock and sleeve to 2.0 liters, 12:1 CR forged pistons, Crower Econobillet rods, Skunk2 stage 2 shizot, 2.5" exhaust. Hondata.
The first "stage" might get you to 12s with light rims, good tires, and a nice launch. Anything else should definately get you 12s.