Thanks alot for the info. here is what i did. i spliced the red power wire from the side bumper lights ( which are constantly on) and ran a wire to the front. then i cut the socket rom the front turn signals and removed the two pin connector for the single filament bulb, and then connected the red(sidemarker constant power), the black, (turn signal ground), and the green(turn signal power{only when turn signal is activated}) to the new three pin dual filament connector. and i did one side and tested the running lights and signals, and everything worked perfectly how i planned, but now that i got finnished, the running lights come on, but when i hit the hazard or signal lights, nothing happens, and i was wondering if there is something i am overlooking, because i checked the hazard fuse and some others, and cant seem to find the problem, so with that infor, if anyone could give me some help that would be great, and thanks to preludechick for her help