Easy installation instructions as provided by my lovely Helms!

1) Remove the brake fluid from the clutch master cylinder reservoir with a syringe.
2) Disconnect the clutch pipe and reservoir hoses from the clutch master cylinder.
3) Pry out the cotter pin, and pull the pedal pin out of the yoke. Remove the nuts (2).
4) Remove the clutch master cylinder
Note: Do not spill brake fluid on the clutch master cylinder damper.
5) Install the clutch master cylinder in the reverse order of removal.
Note: Bleed the clutch hydraulic system

Torque specs:
Clutch Pipe: 11lb-ft
Nuts (2): 9lb-ft