hey all new user here by way of Hondavision and Honda Tech...
Sup Yall!
Thought I would just come on board here and see what
else is out there in the way of forums, anything about
the Teg I am all about learning. My mods are about 6mo
old and I have a 99 pushing 50K. I have:
160hp+ 122tq+ SAE to the wheels
120+ at 5250rpm
98 CTR intake cam
01 ITR exhaust cam
Skunk Cogs
Skunk Ti retainers
ITR Yellow Outers
ITR/Portflow Yellow Inners
NGK wires, Plugs
Modified GSR manifold w/larger secondaries/TB/Header
Stock Intake w/Comptech filter and fresh air
Mugen Headgasket
98 ITR Muffler
ACT HD/SS Clutch
OEM ITR flywheel
Koni Yellows up front/stock rear struts
Comptech Springs/22mm rear swaybar/tiebar
Powerslots/Project Mu B-Force Pads up front/OEM in rear
Potenza RE730s
All else stock.
My goals are to stay all motor hopefully to the 215/150
range on the stock bottom end on larger cams eventually
and full ECU tuning with a shorter JDM final drive. I plan on
leaving the car stock-ish w/ interior sleepish on stock rims
tuning everything evenly. Maybe some auto-x and track
driving. Mainly, I just want to have a sharp Teg. For now,
I am in the range of the ITR for performance, minus the
chassis rigidity... it does make a difference.
Anywhoo! hope to get in the mix wit yall.. have a good 1
Mike :naughty: