OK, some may be confused here. Taking a Windshield out of a Honda without cracking it is almost impossible. Almost, so yes it is doable. Get a long razor blade handle and you can slowly cut the seal, from inside the vehicle. If done carefully and completely, you'll be able to lift the windshield out. You'll then need some suction cups (mine holds over 250lbs.) but the ones from autozone will work, just be careful.

Lift out the good windshield. Now take out your windshield however you please, cut down the old urethane seal to almost metal, take some urethane primer and apply it to the old seals. Spread the new windshield urethane onto the good windshield and set it in. Sounds easy, is hard. I put the new windshield in my ef hb, and it worked fine, just took a lot of careful effort, and the proper tools. goto www.windshield.net and you can get the tools needed, or at least see what you need.

Jung