Print out a honda decal off the net, tape the best sized one to a piece of cardboard then cut out the letters with a razorblade. After painting the visor black, tape the honda stencil to the visor, blocking off everything I didnt want painted tan, and spray a few coats. Take off the stencil and wait for the lettering to dry then tape the letters you cut out on to the visor and respray black. This is done to define the messy edges from any overspray. Thats the way I did it. I figured out that if you print out the honda decal onto sticker paper it will be easier to get good clear lettering the first time and not have to redefine the lettering edges the second time.