When I hook up the vaccum lines I took the line from thats on the intake to the regulator off. I then ran the line from the box(intake port) to the now unused vaccum line on the intake. Then I ran the line from the box(regulator port) to the fuel preasure regulator. Did I do this right or was I supposed to tee into the regulator line. And then tee into a vaccum line seperate from the regulator line.

Also if I run lean can I use the 65 shot fuel jet with the 55 Nitrous jet. I dont want to run lean. I might just do that and read the plugs and if I run rich I can always back it back down to the 55 fuel jet