-T3/TO4E Turbonetics Turbo(I'm not sure what the Compressor maps are but I reached 7 psi at approx 3800 - 4100 rpms)
-B Series Turbo Perf. Nickel Plated Equal Length Tubular Steel Turbo Manifold with ext wastegate(Made for a 35mm wastegate)
-Custom Oil Pressure Restrictor for Turbo (To reduce the Oil Pressure to increase the Turbo life
-Greddy Large Front Mount Intercooler kit for the 92 - 01 Civic (Core Size 23.8" - 11.2" - 2.7", with 2.5" inlet/outlet)
-Greddy Oil Filter Sandwich (allows you to make multipe taps into the oil after it circulates through the filter)
-50 inches of -4 Oil Stainless Steel Braided Oil supply Line with anti-Rub fasteners
-Tial 40MM Wastegate
-Tial 40MM wastegate dumptube (to dump the exhaust fumes to the ground)
-Tial 50MM Blow off Valve
-Nickel plated piping for the Blow off Valve
-35mm - 40mm Wastegate Adapter to use the bigger Tial Wastegate
-2.5 inch Swooping Downpipe (for smooth flow)
-HKS Super Megaflow Intake (just changed the filter)
-The turbo intake has pretapped lines which allows you to easily install catch cans if you like.
-Pre Tapped Oil Pan for B series Engines
-16 T Bolt Clamps
-4 Regular Clamps
-All couples are Rubber Silicon 4 ply and Nitrile Elbos (black 90 bends)
-All the necessary plumping.
-All the oil return lines

What do you guys think about installing this onto my crv/vtec motor?