Originally posted by afrodeziak2k
the amp doesnt get hot only warm, I am pretty sure I have the amp running at 4 ohm (w/ 2 dvc 4 ohm subs) and it is 2 ohm stable anyway. HOw do I set the level adustment control? The different settings are in Volts, what does that mean? The amp itself puts out 500 rms x 1 and has 3 - 40 Amp fuses but still asks for a 150 fuse. Also i heard the fuse is to protect the wiring not the amp is that true?
Well if i had to take an edumacated guess, it's the amp. Not the fuse. If it were the fuse, you'd be looking at a blown out fuse. Where'd you mount the amp exactly? You want to mount it in an area where ventilation can flow, that way it keeps your amp cool. I'm guessing your amp is overheating. Do you ever notice it going out maybe 30mins - 1hr of bumping ur subs, then shuts down?
About adjusting your settings, look in the manual. They'll tell you specifically what settings it should set. All amps are diff, so you have to adjust accordingly.
Regarding the fuses, you should have a fuse(s) within the amp and also one nomore than 12" from the battery terminal. The amps of the fuse near the battery is determined by how many watts your amp is. The power cable is also the same. I mean it doesn't hurt if you're using a lower rating fuse, it just means you'll be replacing that fuse more often than normal. By all means, don't use a higher rating, cuz your might just fry everything. Look on the kit that was supplied and match correctly. Good Luck!