yes, but the screw holes may not line up.

you may use 98-99 2.3 or 3.0 CL rotors and the screw holes will line up..

if you use 2.3 rotors or prelude S/Si (think Si's had 10" rotors), then you can reuse the stock caliper. if you use prelude VTEC or 3.0 CL rotors, u need a bigger caliper.


you press the hub to the bearing either w/ a big f'ing hammer or a press.

the hub should have 4 studs already, rotor goes on and 2 screws hold rotor to hub.