They're kind of a pain in the ass to take out.They fit way too tight and they feel like they're going to break when you're pulling on them.When you pop the hood follow the seam between the headlight and the clear corner, on your right above the clear corner(if you're on the driver's side)there will be a tiny black screw with a Philips head ("star") on it . Take it out,put it in a safe place so you don't lose it.Now gentlely(at first,yours may be easier than mine) pull towards you then out away from your car,if it's stubborn like mine is you may have to use your screwdriver as a "prybar" and carefully pry it out of you car.Note: Honda made the wiring harness extremely short(at least in my Lude) so take it nic and slow when easing it out so you don't rip it out.That's basically it I hope that's what you were looking for.I f you have any problems or questions please feel free to write back, or e-mail me(you've already got it).Good luck!!:thumbup: