rotors
01-31-2003, 01:03 PM
#1
Member
Thread Starter
Join Date: Jun 2002
Location: ATL JAWJUH
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
rotors
Wzup yall.....Does anyone have a DIY on how to put on brembo rotors and aem pads on a 5th gen accord ex? i would love to get these on soon......HELP!!!!
03-16-2003, 10:19 AM
#3
IH8S810
Join Date: Feb 2003
Location: Wichita, KS
Posts: 424
Likes: 0
Received 0 Likes
on
0 Posts
I know it's been awhile since this was posted.. but if it helps...I just had mine put on. I tried twice to do it myself and I got everything off but the rotor. The rotors are hydraulically pressed on, and need to be taken to a shop. Unless of course you have the tools and knowledge to do such work.
03-16-2003, 08:11 PM
#4
Junior Member
Join Date: Jul 2002
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by jsinger
I know it's been awhile since this was posted.. but if it helps...I just had mine put on. I tried twice to do it myself and I got everything off but the rotor. The rotors are hydraulically pressed on, and need to be taken to a shop. Unless of course you have the tools and knowledge to do such work.
I know it's been awhile since this was posted.. but if it helps...I just had mine put on. I tried twice to do it myself and I got everything off but the rotor. The rotors are hydraulically pressed on, and need to be taken to a shop. Unless of course you have the tools and knowledge to do such work.
remove the 2 (12mm if i remember) bolts holding the caliper on
remove the 2 (may need to be drilled out) screws holding the rotor on
hammer the rotor off
put new rotor on and reinstall in reverse order
should take about 30 minutes at each corner with hand tools and a jack