Notices

emissions failure question

Thread Tools
 
Old 12-23-2005, 09:04 AM
  #1  
montemann
Junior Member
Thread Starter
 
montemann's Avatar
 
Join Date: Dec 2005
Posts: 13
Likes: 0
Received 0 Likes on 0 Posts
Default emissions failure question

Just brought the integra to get a sticker and it failed for rust and emissions.
On the emission the numbers that failed are the

CO grams per mile Reading 70.59 Limit 30.00
Could this be wires, cap and rotor, I already did the plugs, mpg has been crappy since it doesnt really warm up while driving(thermostat?) or an 02 sensor

ANy advice on how to bondo a hole under the rear taillight?

Thanks
Old 12-25-2005, 06:18 PM
  #2  
HondaRacing
Junior Member
 
HondaRacing's Avatar
 
Join Date: Dec 2005
Posts: 9
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by montemann
Just brought the integra to get a sticker and it failed for rust and emissions.
On the emission the numbers that failed are the

CO grams per mile Reading 70.59 Limit 30.00
Could this be wires, cap and rotor, I already did the plugs, mpg has been crappy since it doesnt really warm up while driving(thermostat?) or an 02 sensor

ANy advice on how to bondo a hole under the rear taillight?

Thanks
Hey man, I just had my car fail for that same round about number, i changed out my O2 sensor and the cat, and it was good to go!
Old 12-25-2005, 06:36 PM
  #3  
SP00NFed
FuK JDM
 
SP00NFed's Avatar
 
Join Date: Jul 2004
Location: The Left Lane, CT
Posts: 2,493
Likes: 0
Received 0 Likes on 0 Posts
Default

how much did the cat and o2 run you?
Old 12-25-2005, 06:40 PM
  #4  
HondaRacing
Junior Member
 
HondaRacing's Avatar
 
Join Date: Dec 2005
Posts: 9
Likes: 0
Received 0 Likes on 0 Posts
Default

O2 was like 60 shipped if i can remember right from an online store, and the Cat, i borrowed from a friend just for the test
Old 12-28-2005, 01:51 AM
  #5  
Takumi Fujiwara
Senior Member
 
Takumi Fujiwara's Avatar
 
Join Date: Jul 2002
Location: Boston
Posts: 132
Likes: 0
Received 0 Likes on 0 Posts
Default

depending on what year integra you have, you can order a cat straight through carsound or magnaflow for relatively cheap. My stock replacement high-flow carsound was $88 shipped with flanges already welded on. This is for an OBDI LS.




All times are GMT -8. The time now is 07:02 PM.