B20 Boosted??????????
#1
Senior Member
Thread Starter
Join Date: Aug 2003
Location: Jerzee
Posts: 880
Likes: 0
Received 0 Likes
on
0 Posts
B20 Boosted??????????
Hey was up everyone... I got me a 93 teg and I am thinking of what I can swap in it. I know their are tons of options (b16a, gsr, type r, ls/vtec, turbo, nitrous, etc...) A guy I know just put a b20 motor in a ek. It is a stock b20 no vtec, and he is boosting... he ran mid 12's. Has anyone seen this before? The only time I seen a b20 is with a vtec head never just a b20 especially never boosted. What you guys think? Is it a good set up, will it last or blow and not worth it?
#4
Registered User
Join Date: Oct 2005
Location: cape coral fla
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
I Would Go With The B20 More Tq.i Had A Jdm B20b In My Crx And Boosted 10 Psi And I Went 12.0 At 120.my Little Brother Did Ls Turbo And Is At 10 Psi And Its Feels Alot Slower But He Has The A Block So It Less Hp Then The B Block. L
#5
turning u inside out
Join Date: Oct 2003
Location: cortland, ohio
Posts: 2,545
Likes: 0
Received 0 Likes
on
0 Posts
the b20 cant handle the abuse the the b18 can due to its thin cylinder walls. and dont even start the arguement about the walls bring the same because there not!!!
#6
Originally Posted by raiden571
the b20 cant handle the abuse the the b18 can due to its thin cylinder walls. and dont even start the arguement about the walls bring the same because there not!!!
#10
Senior Member
Thread Starter
Join Date: Aug 2003
Location: Jerzee
Posts: 880
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by ///m4life
i can vouch for this. i have an ls/vtec fully built with a t3/t4 .57 trim running 10lbs and i make about 350whp. trust me do it.