-
Clear guage cover...
How do you get this off your trim ring area?
I can remove them both from the actual cluster, not I cant get under the clear plastic...
-
Senior Member
put a razor in the seam and tap with a screw driver till the glue breaks, i already did this and it works, just dont hit it too hard, just tap the razor all the way around the pod. Then just super glue it back, but first clean it with glass cleaner inside and out, then use rubber gloves when u glue it back. super glue fumes will turn white on finger prints, so USE GLOVES. (1.33$ at walmart)
-
Originally posted by Kabooki
put a razor in the seam and tap with a screw driver till the glue breaks, i already did this and it works, just dont hit it too hard, just tap the razor all the way around the pod. Then just super glue it back, but first clean it with glass cleaner inside and out, then use rubber gloves when u glue it back. super glue fumes will turn white on finger prints, so USE GLOVES. (1.33$ at walmart)
you... are the shit.... 
-
-
-
Honda-Acura
Honda S2000
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Honda and the Honda marquee are registered trademarks of the American Honda Motor Company, Inc. Neither American Honda Motor Company nor its subsidiaries or affiliates shall bear any responsibility for Honda-acura.net content, comments, or advertising. Honda-acura.net is not affiliated with American Honda Motor Company in any way. American Honda Motor Company does not sponsor, support, or endorse Honda-acura.net in any way. Copyright/trademark/sales mark infringements are not intended or implied.
Search Engine Friendly URLs by
vBSEO 3.5.2
that's not very nice.
<- click me, i'm fun.
Reply With Quote
Bookmarks