SC : Integra interest thread
Thread Starter
Senior Member
Joined: Jul 2004
Posts: 2,351
Likes: 0
SC : Integra interest thread
INTEREST THREAD ONLY :
I am rebuilding the engine in my Mustang right now. I am going to sell my Integra when I get the Mustang back on the road. This is a thread to see if anyone will be interested in the car.
The car is a 1995 Acura Integra RS. It has a 5 speed transmission and currently the odometer reads 143,xxx miles. It runs well. I have new Brembo blank rotors and Bendix brake pads to be installed on the front. The car has the normal dents and dings around the door area and dirvers front fender. I shaved all the emblems, rear wiper nozzle, front license plate holes, the rear wiper (which I still have) and the antenna. I started work on removing the side molding and filling the holes. I was going to have the holes from the removed side molding patch welded but am going to sell the car. I temporarily bondoed the holes. This has held up well for the past year or so.
I created a custom front bumper and headlight combination. It is very unique and draws much attention during the day and alot at night. I removed the front turnsignals and with fiberglass and bondo, patched the holes. I then wired the turn signals to where the low beams would be. I have the single bulb in the high beam housing. I was going to purchase an HID kit and convert this to HID. That way I could keep the high/low beam in one housing and still have it bright enough. I can make a video of the headlight and turnsignals in action for any [U]interested[U] individual.
The head liner fabric has been removed as I was in the process of re-covering it with black vinyl instead of the grey that it was. The passenger side cloth on the door has been removed as I was going to re-cover these in red vinyl. I have red bulbs in the gauge cluster. I made a custom red and black shift boot out of vinyl. I have some red and black vinyl that I can include if the buyer would be interested.
I have a upper strut bar, a short shifter, and a short ram intake. There are steel wheels on the car now. I have two other steel wheels and tires which will be included. I also have a set of beat up 17" wheels. The 17's have tires on them. The tires are in great shape and are worth at least $200. I will also leave my cd player, sub and amplifier in the car.
I had planned on keeping this car for a long time. This could potentially be a very hot project for someone willing to put in a little time. It was a huge project I started and unfortunately, I have changed my mind on what I want to do. I need the money to help complete my Mustang rebuild. The car is located in South Carolina. I am going to ask $3,000 for the car. If anyone would be interested, or has any other questions or picture requests, please let me know.
I am rebuilding the engine in my Mustang right now. I am going to sell my Integra when I get the Mustang back on the road. This is a thread to see if anyone will be interested in the car.
The car is a 1995 Acura Integra RS. It has a 5 speed transmission and currently the odometer reads 143,xxx miles. It runs well. I have new Brembo blank rotors and Bendix brake pads to be installed on the front. The car has the normal dents and dings around the door area and dirvers front fender. I shaved all the emblems, rear wiper nozzle, front license plate holes, the rear wiper (which I still have) and the antenna. I started work on removing the side molding and filling the holes. I was going to have the holes from the removed side molding patch welded but am going to sell the car. I temporarily bondoed the holes. This has held up well for the past year or so.
I created a custom front bumper and headlight combination. It is very unique and draws much attention during the day and alot at night. I removed the front turnsignals and with fiberglass and bondo, patched the holes. I then wired the turn signals to where the low beams would be. I have the single bulb in the high beam housing. I was going to purchase an HID kit and convert this to HID. That way I could keep the high/low beam in one housing and still have it bright enough. I can make a video of the headlight and turnsignals in action for any [U]interested[U] individual.
The head liner fabric has been removed as I was in the process of re-covering it with black vinyl instead of the grey that it was. The passenger side cloth on the door has been removed as I was going to re-cover these in red vinyl. I have red bulbs in the gauge cluster. I made a custom red and black shift boot out of vinyl. I have some red and black vinyl that I can include if the buyer would be interested.
I have a upper strut bar, a short shifter, and a short ram intake. There are steel wheels on the car now. I have two other steel wheels and tires which will be included. I also have a set of beat up 17" wheels. The 17's have tires on them. The tires are in great shape and are worth at least $200. I will also leave my cd player, sub and amplifier in the car.
I had planned on keeping this car for a long time. This could potentially be a very hot project for someone willing to put in a little time. It was a huge project I started and unfortunately, I have changed my mind on what I want to do. I need the money to help complete my Mustang rebuild. The car is located in South Carolina. I am going to ask $3,000 for the car. If anyone would be interested, or has any other questions or picture requests, please let me know.
Senior Member
Joined: Aug 2004
Posts: 140
Likes: 0
Thread Starter
Senior Member
Joined: Jul 2004
Posts: 2,351
Likes: 0
Sorry to anyone interested, but this happened today...
https://www.honda-acura.net/forums/s...=1#post2754606
https://www.honda-acura.net/forums/s...=1#post2754606