This is a sale for my buddies car. Its an amazing deal, and if I had 12k, I would pounce on it.


FS: please make my 240 go away... $12K

--------------------------------------------------------------------------------

I will sell everything that i have for my 240 for 12,000. This is extra cheap for you local cats...

This is a red 1991 RHD hatch. As it sits right now the car is not running, but has 90% of the stuff you need to get it running. It is a rolling chassis. Last fall when the engine was in the car, it made 410RWHP untuned, on the STOCK motor.

here is a vid of that: http://www.maxpowertuning.com/UBRFrb26s13.WMV

right now the, the car was dissassembled to be built, anyone who buys it all will get a CRAZY deal. Over 30K invested... and most parts are still UNUSED and NIB.

Things that were sold already PLX WB, SSQV, Radiator + fans, EMS, E-01, Plenum+Valve covers, a few gauges...

This car is easily capapble of daily driven 800HP with another few grand of stuff... The engine is currently unassembled...

R32 RB26 Shortblock -- Bored .040 over
- Baked and magnafluxed
- Painted Black
- Skim cut deck
- Wiseco forged and coated pistons
- Pauter rods (all within .0005 on the big end)
- Power Enterprise black metal main and rod bearings
- Jun oil pump drive collar installed on crank (needs set screws installed)


R32 RB26 Head - - 5 angle valve job
- Mild port and polish
- Ferrea valve springs
- Ferrea titanium retainers
- Ferrea valve seats
- Jun extra strong valve guides
- HKS high performance valve seals


RB26 Engine parts - Aftermarket
- Exedy triple plate clutch with max pressure plate pressure
- Tomei Poncam (intake and exhaust) 270 x 10.25 and Tomei solid lifters
- Trust clear timing cover
- Jun high volume oil pump (fits all rb motors vry hard to get)
- Jun main studs (fits all rb motors)
- ARP head studs
- High volume water pump
- Tomei head/intake/exhuast gasket kit (stock thickness)
- Power Enterprise super strong timing belt
- Custom made driveshaft for rb20 trans
- McKinney RB motor mounts
- McKinney Motorsports RB25 s13 driveshaft

RB26 parts - Stock
- t25/t3 hybrid (1 left)
- (6) 450cc injectors
- Turbo manifold
- Individual throttle bodies from intake mani
- Cams
- Pistons and Rods
- Valve springs and retainers
- Timing Covers
- Water pump
- Oil pump
- Valve components (ex. valves)
- ECU
- RB25 oil pan made to fit RB26
- Timing belt tensioner assembly (*brand new*)
- RB20DET transmission
- RB starter


Other aftermarket parts
- (6) RC Eng. 1000cc top feed injectors (*brand new*)
- Greddy warning guages 60mm - Oil temp, Water temp, Fuel Pressure
- HKS Type 1 turbo timer
- PWR FMIC 24x11x3 w/tabs to fit s13
- AEM fuel pressure regulator
- Garret GT3040R w/vband, polished, coated (needs rebuild)

RB equipped 240sx plumbing* - wastegate dump tube
- aluminum mandrel bent fmic tubing w/hks bov flange
- T3 tubular turbo manifold
- 3" mandrel bent exhuast w/electronic cutout

I will also toss in a 5 lug conversion and some pretty sweet white 18X8.5 wheels. I WILL DELIVER UP TO 200 MILES AWAY from 14085! YAY!


some pics, i am going to take a whole bunch tonight

 

Seems nice man but $12k for a non running car is gonna be hard

jus finish it and sell for more

 

$12,000 :rofl: :lmfao: :lmao: Oh thanks man, I needed a laugh.

 

Thats over $20,000 in parts and car. He just got a Lotus Elise and a Turbo Civic to replace this project. Anyways, heres the link for his ebay now.


--------------------------------------------------------------------------------

here is the link to the auction: http://cgi.ebay.com/ebaymotors/ws/e...item=4601439466