intake question
#1
Mr. Motorhead
Thread Starter
Join Date: May 2003
Location: middle of no-where
Posts: 1,031
Likes: 0
Received 0 Likes
on
0 Posts
intake question
i have a 97 civic dx 1.6 non vtec. what intakes will fit on my car, and i am almost certain that they will flow better that what i have?like the 1 that is on the sohc v-tecs?
#2
Junior Member
Join Date: Aug 2003
Location: Orange Park, Florida
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
You should try a D16y8 or Z6 intake manifold. You have the D16y7? Correct? The y8 is probably the better of the 2. Its a pretty easy bolt on project as long as you have everything you need.
Here's a site you can check out .
I dont recommend using sealent like they do in the IACV opening but it will give you an idea of whats involved.
http://www.makuragi.s5.com/civic_99/Y8maniswap/
Hope this helps
Dog
Here's a site you can check out .
I dont recommend using sealent like they do in the IACV opening but it will give you an idea of whats involved.
http://www.makuragi.s5.com/civic_99/Y8maniswap/
Hope this helps
Dog